Version 15 is Live!

It’s done! Version 15 is now live on all platforms, and it includes some pretty special new features. As always, all the maps are right here for you to download, for free. Take one or take them all, and please share them around with people you know. We passed 30 million free maps downloaded not long ago, and we are not slowing down.

Our brand new Track Slope Analysis algorithm warns you of the steep bits are, on 4wd tracks all across Australia. We identified 4wd tracks across the country, broke them up into little bits then analysed each one of those slices to see how steep it was, marking every one which might be worth knowing about. The rough ‘steepness’ it takes to get marked is supposed to be low-range 2nd gear and some speed to get up it, especially if it’s wet. We will continue tweaking the algorithm in successive versions, so for now we opted to make it a bit too sensitive rather than not sensitive enough.

Private and Management-vehicles-only roads clearly marked with their own symbology. We are still reliant on what information is in the data we can access, but it’s better than nothing? At least we hope it is.

Lots of new Points of Interest: 1700+ new campsites added, UHF and amateur repeater locations, SOTA peaks,. Hut and ruin data corrections and updates, and more.

Base data updated, including new Victorian Seasonal Road Closures data for 2021 (it changes every year), bushfire data updated to include the previous year’s fires

And then there are the other symbology improvements together with better satellite base shading resolution, and the rest of the stuff I can’t remember.

New 1:250,000 Mapsheets

The 250k series is now in more smaller mapsheets. This was necessary to allow us to include the new improvements we have rolled out to the other series. It was simply too much complexity to include in the massive 250k sheets we were using before, which are actually designed for a 1:1-million scale. So there are lots more sheets to cover the same area, but there is lots more info on them. We’ve also stitched them into a single sheet for Oziexplorer users, which makes deploying them on your device easy AF.

Everything Zipped

We have zipped every series and made that zip file available for download next to the link to the folder. If you want one map, or a selection, use the folder and take what you want. If you want all of them, just download the pre-zipped set.

Live maps

We are constantly updating our Getlost Live maps. What version are they at? They vary depending on where you look, but they’re moving towards V15 at all scales across the whole country. Zoomed out, the maps is a bit different, because Getlost Maps aren’t really designed around those big scales yet, but once you zoom in a bit, it switches to Getlost Maps.


NT and WA have not been updated, because we’re waiting on substantive new data to come in so they can get an upcoming massive improvement … watch this space! They are of course covered by the new 250k series.

Download Now

Get your new V15 maps now at The Map Table, or inside Avenza or anywhere else you use them.

Version 14 Published

Version 14 is now live for all Map Series; Nationally at 1:250k, Qld, NSW, Vic, Tas, SA and NT at 75k and 25k in NSW and Vic.

You’ll see contour lines in all states and territories (50m contours at 75k and 10m contours at 25k), some new track info, over 10,000 camp sites along with huts and ruins.

The biggest change is the satellite underlay, which we are trying out for the first time in this level of detail. It’s unlike any other map available, offering you a full topo map over a subdued satellite and hillshade background. Hopefully we got the balance right and made it as usable as possible.

Victoria 25k now includes the newly released (yesterday) 2020 bushfire data. We will also be putting together a 250k Bushfire map set which will show the 2019-20 bushfires in even more clarity, specifically for those wishing to plan around them. This will be out in a week or so.

All maps are now on the website, and have been sent to Avenza where most are already active and the rest will be shortly.


Version 14b removes the satellite layer, which made the map too dark in some places. It will be tweaked and we hope to issue a version with a satellite layer again soon.

Queensland Released; joining NSW, Vic & Tas @1:75k V12a

Queensland is complete at 1:75,000 in 140 large sheets. It joins NSW, Vic and Tas also all available at that scale. The rest of the country is still at 250k for now.

Qld track and other data is fairly good, with only index contours visible at 75k as we do in other states at this scale. The tracks are a mixture of three different sources, all of which are absolutely useless on their own, but when all represented together form a useful map. You’ll see them independently resented in red, black and purple. The whole state is 140 large sheets – it was either that or cut it up into 750 sheets, which seemed like a lot. Turns out, Qld is quite large.

Qld 75k series

Hillshade and Resolution Improved

As part of building Qld, we put together a national, high resolution hill-shade layer. We then applied this to all the other series as well.

This allowed us to re-issue NSW, Vic and Tas at a higher resolution than we were able to before; up from 160 to 220 dpi. This makes them much clearer, especially when zoomed in. You’ll find them all now available at V12a.

New hillshade in action

Both Qld and the newly high-res and hillshaded series are all ready for download on the website. Avenza has them as well with most ready to go already and the rest live in a day or two.


Thank you

A big thank you to everyone who has donated to the project. It didn’t cover the new costs but it certainly helped.

We purchased the new computer, which is what allowed us to produce Qld and Tasmania and improve all the other series without it taking a month of processing time.

We also upgraded our online storage to a more expensive plan to be able to deliver all these maps, with over 350Gb of them now available to download.

If you would like to contribute to the project and help us pay for ongoing updates and development, it would be very much appreciated. We hope to keep expanding and do the whole country in free topo maps as soon as we can!


NSW is here! Large scale coverage of NSW.

NSW at 1:75,000 sample

NSW is finally done! The whole state is covered at 1:75k (same as Vic) and most of the state is at 1:25k as well. At 24 May 2020, the 75k series is ready to download – the 25k series will be available shortly.

This is our first go at NSW, but we’ll tie it in to the existing version numbers so NSW will begin at v12 (Vic is at v11 right now).

The national series already covered NSW at 1:250k, but that uses a different data source and is nowhere near as detailed. The new NSW series have full topography, multiple track and road data sources, rivers, creeks, lakes, gates, campsites, huts, etc – everything you’d expect from Getlost Maps. 1:75k has 50m contours and hill shading, while 1:25k has 10m contours. There are more labels on the 25k series, but the 75k is probably better for route planning and the like, and has almost the same level of detail, if a bit squished.

Our first NSW series doesn’t have some of the more specialised data just yet, like seasonal track closure information, hunting info, marine and bathymetry data, but we will move towards identical information coverage or as close as we can get to that.

NSW at 1:25,000 sample

There will be bugs and stuff missing – that’s to be expected as this is our first go at NSW. For example, from what we can see, the track names seem spotty in some places, with the tracks visible but name-less. This is to be expected at the smaller scales but it’s odd at 1:25,000 so we’ll chase that down. Better the track is there without a name than the name is there without a track I s’pose.

The Avenza uploads are underway, so the whole series should be available in there shortly. Direct downloads are ready now, from The Map Table.

And yes, every one of these maps is available absolutely free. Download one or two of 1000 of them – grab as many as you like. We’ve had over 10 Million Getlost Maps downloaded so far, and the more the merrier.

NSw 1:25k sample, zoomed out

If you can spare a dollar and you’d like to support our ongoing work (and maybe help me get a faster computer so it doesn’t take 6 days of 24/7 processing to produce a single series), please consider making a donation or buying a map bundle through Avenza (we get about half the bundle cost).

New Releases: Version 11 (Vic) & 250k National Series

Version 11 for Victoria is out at 1:25,000 and the new scale of 1:75,000. The whole country is covered at 1:250,000.

25k sample

At smaller scales Version 11 includes the relief shading, and at larger scales it has hunting information and a number of improvements. Huts, ruins and campsites are significantly expanded, and Victorian seasonal road closures now include the dates each road opens and closes. Huts (and their ruins) include build (and rebuild and destruction) dates as well as all known names. Colours have been improved slightly for clarity.

New 75k Series replaces both 50k and 100k

New 75k Series

The new 75k series replaces both the 50k and 100k series, and includes both 100m contour lines and relief shading, along with all the other V11 improvements. Victoria comes on 70 sheets. There is a whole-of-Victoria single sheet as well for OziExplorer.

New 250k National Series

New 250k Series Released

The new 250k series covers the whole of Australia, and comes in great big mapsheets; Victoria is on just 2 sheets and the whole country is only 49 sheets.

Detail is reduced at that scale, and to make the transition seamless some of the data sources are different to the larger scale maps so there will be slight differences. As this scale is more for long distance route planning, we’re hoping these changes won’t cause too much drama, and we hope expanding coverage to the entire country in one go was worth it.


Avenza is having trouble with the new 250k sheets, with about 1/3 them not processing properly. We will probably have to take data out of the series to get them to load into the store, as they’re too information-dense for their servers to process. You might still be able to load them manually from the GeoTiff files but this may depend on your device.

The other series will be uploaded and will go into their approval queue, and once released by them, they’ll come up in your device as updatable. We send them to Avenza but it takes time for them to update their end.

Map-for-map, new 25k will replace the old 50k series, as we’re doing 25k scale on the bigger 50k sheet size. The new 75k maps will replace the old 100k for the same reason, so if you have a 100k map of somewhere, when it updates you’ll find yourself with a 75k map with the same boundaries. This should happen automatically for anyone who already has those maps.

If you have a 25k bundle, a new bundle will be created to automatically replace your maps with the new bigger sheets so you won’t lose out. For those with a 100k or 50k bundle, you’ll get the 75k series. It has all the features of the 50k maps, in oversize sheets, with relief shading. This process will happen by itself over the next week or two so watch your device for update notifications.

Download Now

All map files are accessible from The Map Table.
Our Avenza online store is also updated.

All our maps are free, as always.

Getlost Maps V11 In Production

1:75k example

Version 11 (Victoria) is now being produced.

It will come in three scales;

  • 1:75,000 will be put on the old 1:100k mapsheets (which cover the state in 70 sheets), complete with their pretty new relief shading as well as 100m contours.
  • 1:25,0000 will come out on the old 1:50k mapsheets, with the state on 431 sheets.
  • A new 1:250,000 series will be produced, in a few sheets as possible, with the intention being that the whole country can be produced at this scale first even before we drill down in each State

New in V11:

  • Relief shading added to smaller scales making things a bit easier to visualise
  • EVEN MORE huts, campsites and ruins marked
  • Huts and Ruins have dates where known – huts have construction dates, ruins have construction and destruction dates and names of what was there, where we have the data
  • Seasonal Road Closures have the dates on them, both open and close, because they vary a surprising amount (up to 6 weeks difference between tracks in some areas)
  • Hunting information, including where deer and where ferals can be taken on state land. These sometimes overlap, but we have been surprised at some places they don’t (eg you can hunt deer, but not rabbits in much of the state forest in the Thompson Dam catchment – all that area south of the Matlock road)
  • Ferry routes added
  • Various clarity and overlay improvements making things clearer

The full sets are still a week or two away, but you can check out the demo maps as they come, here.

Tasmania Version 0.1

Taswegians! Version 0.1 is ready.

This is a pre-production version, so it is not at every scale or in every format, and it still needs work, but it’s quite usable for many purposes – I’m using it right now! It’s on big sheets (250k index sheets) but the actual scale is about 1:75,000, which is around 10m per pixel. It has shaded relief but this one doesn’t have contours (they double the time it takes to ‘print’ it out).

It has most of what you’d expect from a Getlost Map; all the roads, tracks and paths I could find, national parks and conservation reserves, timber harvesting and game reserves, rivers, lakes and more. It has a forest layer, and then a new Tea-tree (sp leptospermum) layer which I’m told is where you’d find a Tasmanian Deer.

Some quite a few things are missing at the moment; Town names for starters, many of the points of interest like huts and campsites … I have them, don’t worry, they’re just not on this print. There are also a bunch of walking tracks missing which I will need to track down, because I know I have the data, but it didn’t seem to print. Some of this is finding the happy medium between different data sources and getting use to how much I can rely on the Tas Govt data.

With that aside, I’m happy to take any feedback you might have!

Download from here.

National Coverage

Demo map of detail available right for all of Australia at Version 0.1

Full Australian coverage Getlost Maps are at Version not-quite-1, but they are coming along.

They’re not very data-rich yet, so there isn’t much point it doing them below 1:100k at this point, but what I could do is cover the entire country at 1:100k, delivered in big 1:250k mapsheets like this test map linked below.

Demo map at their current level of development is HERE (JPG).

The question is; would people want them at this stage of development, or would they rather wait until the maps are closer in features to the Victorian set?

Comment below or on our Facebook page!

Hunting Data

Example of symbols in testing

Deer Hunters, or should I say Dear Deer Hunters?

I’m trying to fit newly acquired Deer hunting areas into the map. I’d like it to be usable, but not overpower everything else (it’s not a dedicated deer-hunting map – it’s used for all sorts of things).

Bigger scale with other features

How does this method (above) strike you? The letters next to the deer symbol stand for Sambar, Hogg and Other. In the example at the top you have a Sambar-only area, and an area where multiple types can be taken.

Also, the little ‘cats’ or ‘foxes’ are areas where pest species can be hunted.

Leave your comment below, or on our Facebook page.

Side-Project: FreeGunSales

Once again, we wanted something to be available for free … so we built it and made it free.

Once upon a time only gun shops (registered dealers) could advertise guns for sale. Some gun sale sites were set up which charged money for you to advertise on them. These days, anyone can advertise guns as long as they meet the basic rules, but of course sites like gumtree and ebay don’t allow guns to be advertised, and everyone else want to put their hand in your wallet, if not today then tomorrow.

So the problems I’m trying to solve here include:

  1. I reckon you should be able to advertise your guns FOR FREE, just like selling a toaster. Not free-for-a-limited time, not free to post then you pay later, not cheap … FREE.
  2. I want to be able to upload high-resolution images, not the tiny pictures some sites restrict you to, and lots of them, not just a few.
  3. I want to be able to post your own ads. Then edit them yourself. Then take them down yourself. Not email people then wait for them to do it for you. 
  4. I don’t want to wait for ads to be approved by a human. I want them live when I post them.
  5. I want to be able to register an account and get posting, or buying in under 30 seconds with no excess personal information handed over, just the minimum.

So that’s what I’ve done.

  1. It’s free. It will always be free. It’s in the title. It’s in the URL.
  2. You can upload massive images, and a dozen of them. 
  3. You are in control. You post your own ads, you take them down. 
  4. All ads go live as soon as you submit them. They come down as soon as you delete them.
  5. You register, the “are you actually a person” email arrives almost instantly, you click it and you’re done. You start posting. That’s it. 

That’s the project. It’s done, it’s working, it has ads on it.

It’s free and it will stay free, just like Getlost Maps.

Index, Specials and Large Maps Updated

Index Maps

The index file doesn’t change much, so it hasn’t been updated since V8 – but it has now been refreshed. It should be clearer and easier to use in its new form. It’s been sent to Avenza and is also available through The Map Table.

New Index V10e – click for full size (16Mb)

Special Maps

We’ve refreshed the Special Maps to include the new symbology for walking tracks, updated special seasonal road closures and other improvements. For example, the Mt Buffalo map now shows the special seasonal closures they do up there, which are not included on the list of Seasonal Closures released by DELWP. A similar closure system applies to Falls Creek which doesn’t show up without manually inserting it, which we’ve now done.

Special Maps cover the whole feature at a large scale. Example: Buffalo Special

We’ve also added a new Special for the Buangor State Forest and surrounds. Did you know there are several huts in there?

Also updated are the Large Maps – the entire state at 100k and the state in two maps at 50k, in OziExplorer format.

If you download your maps through Avenza using their ‘map store’ (ie not by manually importing them) your copies should offer to update themselves. For every other method, replace your existing maps with the new ones at The Map Table.

Next Stop: NSW

We’ve started our expansion into mapping New South Wales, as part of the broader project to map the whole country.

It was always the plan to one day map the whole of Australia, but each state has its own challenges around accessing suitable data, matching formats, licensing, private land designation, data quality etc. NSW has some weird stuff around exclusive use licenses covering some state forests, so we’ll need to sort that out.

As with Vic, we’ll be using a multi-layered combined data approach, to try to make up for the gaps in each dataset. If one source says the road goes left and another says it goes right, I’d rather just give you both than try to guess which is true. How much variation there is … had to know until we get into it.

Wish us luck!

Version 10 Released

Version 10 is now on The Map Table for download. Altogether it’s about 71GB representing 1360-something maps in 8132 files with 3 image formats, if you need the whole lot … which you probably don’t.

25k, 50k and 100k series have been updated, as well as the whole of the state at 100k, and each half (East and West) as massive 50k maps, in OZF format. All the standard maps have been sent to Avenza for processing, and should then replace existing maps for those who have older versions already.

The shading has been changed up quite a bit to make deep-layered areas clearer, and make the distinction between tree-cover on private land and tree-covered public land much clearer. Historical location shading has been altered. Walking track representation has been changed, and will be changed again in future to take into account the common case of a track being designated for both vehicles and walking (and often seasonally closed on top of that). The burn history layer was removed because the data density still makes it too unwieldy. We might release it as a separate layer for those who want it.

25k series sample

Bush Huts

Huts and ruins have been updated in the new maps, and are even more up-to-date again in the downloadable POI files available separately (at The Map Table) so you can put them in your GPS or App of choice. This is definitely the most up-to-date and complete dataset of bush Huts of Victoria available anywhere on the web, and incorporates all other public datasets, with information then manually corrected and curated using trip notes, satellite images and field surveys. If we missed any – let us know!

Huts ahoy


You would not believe how hard it is to get solid Hut data!

I pulled the Vic Gov list – it’s about 100 huts, 1/3 of them are not even there, and HEAPS are missing. I pulled data from several lists I found online, and added every hut I’ve ever been to, looked up track notes, removed those reported destroyed. Some of them are in NSW around the border, but most are in Vic.

I then went through every record, plotted each one, manually removed duplications, looked up every one in 3 sources of satellite imagery, corrected locations, relabelled some as ruins, and any I couldn’t find from the satellite image but can’t be sure has burned down I labelled as (approx).

I have 341 Huts now, not including ruins, most of them in Vic, some in adjoining areas.

Feel free to download the waypoint file that I COULD NOT FIND ANYWHERE, but I thought should exist, so I built it myself – just like the maps. The file is provided as a GPX which should work most places, and a WPT for OziExplorer.

If you have any that I’ve missed, or if I’ve made any other mistakes please let me know.

Download the waypoint file here.

Special Maps

Skiing Mountains, including Falls, Buller, Hotham, Bawbaw and Lake Mountain have been added to the Special Maps folder. They’ve also been sent to Avenza.

They’re scaled and built to make the ski runs and tracks clear: 1:8,000 – 1:10,000, some of the extraneous details removed. Last year we had tens of thousands of maps downloaded of ski resort areas, so this year we decided to purpose-build maps for those people.

They’re done and are uploading. They’ll be available in all formats shortly.

Download at The Map Table

Version 9 now on Avenza

All Version 9 maps are now live in Avenza, from 25k up to 100k. The index has been updated as well. 2019 seasonal track closure layer is in it, so if you have older versions use the app to do an update.

Older 25k and 50k maps should prompt you* to update them to the new version. If you have the older 100k maps you’ll have to get the new ones manually as they use a different split and different names. If you have a bundle, the contents will have updated and allow you to keep the bundle but with the new contents.

* From Avenza: “map versioning will become a feature in the app with 3.7, which should be released at the end of the month, if not very early June. Once users have 3.7, there will be a button next to each map they have downloaded, prompting them to update to the latest version of each map. “

Visit Getlost Maps on Avenza

Other Formats

Website versions are still uploading … the 25k OZF set is almost 13GB alone, to give you some idea of the level of detail in it. The 50k set is about 3.5GB and the 100k set is just over 1GB.

Most people probably won’t need the 25k, or won’t need all of it. The 50k has the same features; the 25k has higher resolution contours and a bigger scale for accurate work.

Version 8b Released

V8b at 1:100k

V8b has a bunch of improvements, and some new map types.

  • Brand new 1:100k map of the entire state of Victoria, on one sheet, in OZF format for OziExplorer
  • 100k layer made clearer and simpler for route planning
  • 1:50k mapset replaced
  • New campsites and other points of interest
  • Walking tracks plotted with more clarity in pink rather than red
  • Shading changes to several layers for clarity and to stop them bunching up
  • UTM grid made smaller and lighter
  • New Index maps

As always, maps are on The Map Table, and will be in Avenza shortly.

Bushfire Closures

To help with Easter 2019 trip planning, we’ve taken the map produced by Parks on 9 April, then calibrated and converted it for use in OziExplorer. It’s available in JPG and OZF formats with .map files.


Version 8 Complete

Version 8.1 is now complete and published in all formats, incorporating corrections of those few niggling errors from 8.0.

All data is refreshed, plus new layers in this version include:

  • Last Logged [year]
  • Old Growth forest
  • Wetlands
  • Fire towers and radio repeaters
  • Water Points
  • Historical sites
  • Master Contours

Download JPG, GeoTIFF and OZF at The Map Table or visit the Avenza Store.

Version 8 Rolling Out

It’s been 6 months since V7 maps were sent out into the world.

With over half a million maps downloaded, it seems like some people found them handy. The snow season saw huge numbers of people pulling maps of ski resort areas, hopefully helping them get home safely.

In V8 all existing data has been refreshed, so that’s roads, tracks, park boundaries and OSM roads so you still have that second source for track data out where government employees with power to correct map data fear to tread.

New in Version 8

  • Freeways and Highways look different to other roads so they stand out
  • Last Burned layer so you can manage your expectations about that great campsite you remember from 1997 (eg “Bushfire 2003”)
  • Last Logged Year (eg “LL:2017”) for much the same reason as above. Nothing like rocking up to that nice spot beside the creek to find the area looking like Tunguska in 1909
  • Wetland layer to find the swampy bits
  • Historical landmarks with labels – some new places to explore
  • Transmission lines, because they’re a visible landmark
  • Old Growth overlay (“OG”) if you’re looking for real trees instead of modern reproductions
  • Tweaks to POIs, including waterfalls, caves, picnic tables and shelters, fire towers, radio repeaters, ruins, water points, tanks, quarries (some of them make reasonable emergency fire refuges) and other bits and pieces
  • Masterlines for the contours; every 100m the contour lines are thicker than normal ones.
  • 1:100k version, with some features removed for clarity, including most of the contour lines – masterlines only. Some other features also removed to make a cleaner map to suit the scale. Good for route planning through the shrubbery as all tracks are still there, terrible for built up areas or places with too many tracks and features.


100k set is done (JPG), which will be followed by the GeoTIFF conversion, then Ozi. Then we move to 25k. Last we upload everything to Avenza. Give it a week to 10 days to get everything where it needs to be, so expect it all available before Easter for those heading out for the long weekend.

Index file will be refreshed and will include the map key which somehow got lost on V7.

As usual, the download info is over at The Map Table.


There will be errors. The 100k set will have teething problems for sure. I’m not sure that it likes coastlines … the index looks like a dog’s breakfast down south, but we’ll see how we go.

Seasonal closures don’t get announced until May, and then we’ll request the shapefile so we can do a V8.1 refresh to incorporate the new data and replace the old.


A massive thank you to everyone who threw us a dollar or three!

We’ve paid for the hosting and bandwidth for 2018 so I’m no longer getting looks from my wife about spending her money on top of the hundreds of hours to get this project started.

If you like the maps and want to support 2019’s costs or just want to buy us a beer, the donation info is here.